Description

Luminaries’ series PGS used for different types of outdoor lighting applications.

Luminaries’ series PGS used for different types of outdoor lighting applications. Streets, bridges, passages, gas stations, railway platforms, parking lots and other areas – the places there you can get best benefit using these LED luminaries. Street lamps series PGS meet all modern requirements having high lumen output and competitive pricing.

Do you want to know more?

Click to access our Contact Us page where you can send us an enquiry.

Make enquiry

Product details

Type
PGS
Protection Classes
Class I, Class II
Product
Outdoor luminaire UV and moisture proof
Color
RAL7015 or RAL7035
Ingress protection rating
IP66
Ambient temperature
-40°C ≤ Ta ≤ +45°C
Resistance to mechanical impact
IK09
Color Rendering Index
Ra> 70
Luminaire tilt adjustment
Side entry -25° + 20°, step 5°
Interfaces (optional)
1-10V, DALI, Dynadimmer
Power factor
PF>0.95/230VAC
Lifetime
L70>60000 h (Ts=80°Limited by TM21 rule 6x); L90B10 - 100000h
Typ. efficiency
93,00% (at 230 V / 50 Hz / full load)
Constant light output
The function ensures that the emitted luminous flux remains stable
Maintenance
No internal cleaning required
Universal post top / side entry spigot
for Ø60mm
Dimensions
L x W x H 438x233x73 mm
AC voltage range
198-264 V
Remarks
Luminaries are ready to install
Mains frequency
50/60 Hz
In-rush current
32 A / 267 μs (peak / duration)
Overtemperature protection
The luminaire protected against temporary thermal overheating. If the temperature limit is exceeded the output current is reduced.
Materials
Housing is made of very corrosion resistant die-cast aluminium. Polyester powder coated painting after chemical washing treatment. Stainless steel bolts and springs
Mains surge capability
up to 6kV, (between L/N – PE), without DALI connection 10kV
Dynadimmer
Allows dimming to predefined light levels based on the nightly operating time. With flexibility in setting time and light levels, the user can configure the driver for specific locations and
application needs. Using Integrated Dynadimmer, it is possible to set up to 5 dim levels and time intervals. The driver does not have a real time clock. Instead it runs a virtual clock, determined by the length of nightly operating hours. After 3 ON-OFF cycles, the driver will calculate the virtual clock time. A valid ON-time is defined as a period during which the driver operates continuously for ≥4 hours to ≤24 hours.

A motion sensor can be associated with one or more luminaires which, when activated by passing cars, can signal the driver to override the dim cycle and go to full light output.
Type
PGS
Protection Classes
Class I, Class II
Product
Outdoor luminaire UV and moisture proof
Color
RAL7015 or RAL7035
Ingress protection rating
IP66
Ambient temperature
-40°C ≤ Ta ≤ +45°C
Resistance to mechanical impact
IK09
Color Rendering Index
Ra> 70
Luminaire tilt adjustment
Side entry -25° + 20°, step 5°
Interfaces (optional)
1-10V, DALI, Dynadimmer
Power factor
PF>0.95/230VAC
Lifetime
L70>60000 h (Ts=80°Limited by TM21 rule 6x); L90B10 - 100000h
Typ. efficiency
93,00% (at 230 V / 50 Hz / full load)
Constant light output
The function ensures that the emitted luminous flux remains stable
Maintenance
No internal cleaning required
Universal post top / side entry spigot
for Ø60mm
Dimensions
L x W x H 438x233x73 mm
AC voltage range
198-264 V
Remarks
Luminaries are ready to install
Mains frequency
50/60 Hz
In-rush current
32 A / 267 μs (peak / duration)
Overtemperature protection
The luminaire protected against temporary thermal overheating. If the temperature limit is exceeded the output current is reduced.
Materials
Housing is made of very corrosion resistant die-cast aluminium. Polyester powder coated painting after chemical washing treatment. Stainless steel bolts and springs
Mains surge capability
up to 6kV, (between L/N – PE), without DALI connection 10kV
Dynadimmer
Allows dimming to predefined light levels based on the nightly operating time. With flexibility in setting time and light levels, the user can configure the driver for specific locations and
application needs. Using Integrated Dynadimmer, it is possible to set up to 5 dim levels and time intervals. The driver does not have a real time clock. Instead it runs a virtual clock, determined by the length of nightly operating hours. After 3 ON-OFF cycles, the driver will calculate the virtual clock time. A valid ON-time is defined as a period during which the driver operates continuously for ≥4 hours to ≤24 hours.

A motion sensor can be associated with one or more luminaires which, when activated by passing cars, can signal the driver to override the dim cycle and go to full light output.

Filter codes by:

Lumen (lm, system values)

Min
Max

Power (W, system values)

Min
Max

Efficacy (lm/W ratio, system values)

Min
Max

Choose filters

Please use the filters to find the products you need

This website uses cookies. Cookies are used to collect information about site visits, improve website performance, and offer relevant content and ads to users. For more information, please see our Cookie Terms of Use. Read more.
This website uses cookies. Cookies are used to collect information about site visits, improve website performance, and offer relevant content and ads to users. For more information, please see our Cookie Terms of Use.
Read more.